VHM Conrod Kit KTM 125SX '16-Onwards Lightweight

Description

CRK1502 VHM light weight connecting rod kit

The VHM connecting rod is around 19 grams lighter than the original.

You have to use the massive big end pin to compensate the lower weight of the conrod and to adjust to the correct balance factor for less vibrations.

Conrod made from premium material, hardened and with polished finish. You can’t compare this conrod with a OEM conrod, the finishing of this conrod is premium, top quality.

Same material we use for our roadrace conrods.

Through engine braking, standard big end hole of conrod deforms 0,015-0,02 mm oval, while our VHM conrod only deforms 0,005 mm (due to high strength material). In addition, this conrod is also super finished, which ensures a smooth surface. This helps prevent small fractures in the material.

Better throttle response, because the conrod is lighter.

Best Japanese brand big end bearing.

Less weight also less load on the big end bearing.

Less deformation of the big end.

You can use this kit in the original crankshaft and VHM crankshaft.

The VHM conrod kit, comes complete with conrod, big end pin, big end bearing and 2x washers.