DescriptionThis cylinder head will improve the power output of the KTM SX85 . A must for any rider wishing to be a winner on a KTM SX85. VHM produces exchangeable cylinder heads for two-stroke engines in motorcross and road racing. With the help of experience gained in two-stroke tuning, VHM develops products of high quality. The combustion chamber is very easy to change, just untighten the cylinder head, take it off and you can change the combustion chamber. This makes it very easy to adjust the combustion ratio to different circuits and fuels that are used. Combustion chambers for unleaded fuel are deliverable. During intensive tests, on the racetrack as on the VHM testbench, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. An other advantage of the material is its resistance to detonation. It is also possible to design your own combustion chamber, just take a blind combustion chamber and you can make any type that you want. A cylinder headset contains a cylinder head, combustion chamber and the necessary O-seals. while we offer 2 options for you to choose we also can for not extra cost make a head set to your design. please call if you wish something different from what is on the drop down menu. 0044 (0) 1487 813755
|UK - Standard||£5.15||3-5 working days|
|UK - Standard||FREE||on orders over £100 (tracked and signed for)|
|UK - Premium||£9.10||Next day (if ordered before 2.30pm)|
|Europe||POA||2-5 working days (tracked and signed for)|
|Rest of world||POA||1-5 working days (tracked and signed for)|
You may also like
Replacement Reed Petal Kit Vforce3 Aprilia RS50 (all years)
Moto Tassinari continues to test and develop new "recipes" for our carbon fibre used in the VForce3 Reed Valve system. In fact Moto Tassinari specs our own exclusive recipes for all the carbon fibre we use, you can be assured you'll never get "generic" carbon fibre Replacement reed petals for the Vforce 3 reed valve system, the kits includes instructions and replacement retainer bar.
VHM CRF250/450 CLUTCH SHAFT 2009-2019
VHM are always looking to see that motocross and enduro bikes are the best they can be,while track testing with the crf250 and 450 they found while racing the clutch would change its bite point. The research into this found the cranks expansion when heated up expands enough for the standard steel clutch shaft which does not expand at the same rate would be to short. The answer is to make a rod from alloy and to steel tip each end to give the required resistance to wear. This part will ensure your clutch lasts as long as it can under the conditions.
vforce 3 reed valve cobra cx50
the vforce 3 is standard on late model cobra cx50 and cx65, we seel many valves for old and new machines.the vforce3 brings improved torque and throttle response. the picture is not of the cobra valve